5 Common Roof Damages and How You Should Tackle Them’

Your roof is one of the integral parts that make your home. As much as other parts of your building, it deserves your attention. It is your home’s first protection against bad weather. A small problem can become a big issue if you don’t identify and address them quickly.

Knowing the different types of damage can keep you ahead of potential problems. Let’s look at some common types of roof problems and how you can tackle them.

Wind Damage

A heavy storm is usually a nightmare for homeowners. A heavy windstorm can make tiles or shingles fall away. Besides, falling tiles can be dangerous for you and your family.

A windstorm can cause a lot of potential damage. You want to be on the lookout to avoid any after-storm drama. Make sure there are no tree branches on your roof. Also, check your guttering system to ensure it’s not obstructed. If you can’t check this yourself, get expert help.

Rain and Snow Damage

Rain is a part of life everywhere. However, heavy rain or hail can harm your building. Snow is another natural phenomenon that can cause concerns.

Damages from rain or hail can result from excessive downpour. When your roof is exposed to water for too long, its outer protective layers erode, causing it to start leaking. Snow and ice roof damage can also be a result of ice dams.

Moisture from the water makes your roof prone to mold infestation, decay, rot, mildew, and other pest infestation. Ice dams or ice ridges can also lead to moisture leaks. Left unattended, it can undermine the structural integrity of your building.

Punctures and Holes

Holes and punctures are common rooftop issues. Although they may seem trivial, they can cause various issues. They can be the doors that allow pests and insects into your home.

Most times, holes and punctures are caused by wood pecking. Too much roof traffic or walking over shingles during construction can cause a puncture. Regular inspection is what you need to identify and solve this problem before it escalates.

Damaged Roof Flashing

Roof flashing is a thin sheet of galvanized steel or aluminum installed beneath your shingles. The flashing runs over your building to protect its internal structure from water damage. Roof flashing damage is usually common where two joints of the roof meet.

If your flashing is not well-fastened, it will not provide your wood with proper water resistance. In addition, with time, the tar used to seal your flashing may erode, leaving your roof in danger of rain and storm. Proper maintenance can come in handy.

Aging Roof

Even the most durable construction item usually has a lifespan. However, proper maintenance can extend this lifespan. Signs of an aging roof include greed-out shingles, evident rust and moss, and shingle granules downspouts.

If you spot any of the above signs, performing temporary fixes will not stop the damages. Contact a reliable contractor to evaluate the level of damage and work out a path to a permanent solution.

Conclusion

A damaged roof does not mean you have to do your roofing all over again. A good repair by a professional can return your property to its former glory. By identifying the type of issue you have, you can save costs and protect your property from severe defects before the become irreparable.